Umiguard Z40

We are a Leading microbial control solution provider. We adhere to independent innovation and technology research and development, and protect customers' assets with our strong technology research and development and implementation capabilities.Our formulation range offers benefitsincluding long-term preservation, fast-acting disinfection, temperatureand pH stability, zero VOC content and low viscosity for ease of handing. To meet modern market requirements ( EUH 208 and EN71 regulations).our in-can biocide range includes formulations that are free fromhalogens,formaldehyde, CMT/MT and MIT.

Application：

This product is particularly effective as a single active dry film preservative, and can be used in:

-Architectural and industrial paints and coatings.

-Building materials, including floor adhesives, caulking agents, sealants, cement pastes and joint compounds.

-Building materials, including ceilings, ceiling tiles, walls and internal partitions.

The tank shall be protected against corrosion by water-based products, such as:

-Aqueous mineral and pigment slurries.

-Synthetic polymer emulsion.

-Water-based adhesive.

industrial paints and coatings

Product Specification:

Typical Physical Properties
Composition	A white-to off white fine particle size 52-56% solids dispersion.
Physical form	Liquid
Viscosity at 25℃	5000-8000cps
pH at 25℃	8.0-10.5
Boiling Point	100℃
Flash point	Boils without flashing
Storage stability	Stable under normal conditions of storage down to 0℃. If frozen, allow to thaw and stir well before use.
Compatibility	Avoid strong alkaline conditions,oxidising agents, reducing agents,amimes and mercaptans.
Density at 25℃	1.40- 1.45 g/ml

Specification:

Product Name	Antimicrobial Activity	Suit PH	Physical Form	Typical Dose Levels (%w/w)	Performance Effect
Umiguard Z10	Fungi (Yeast & Molds), Algae & Bacteria	4-10	Aqueous Dispersion	0.2-1.0%	Efficient inhibition of mold, yeast, and algae growth, green and stable, providing long-lasting protection.
Umiguard Z40	Fungi (Yeast & Molds), Algae & Bacteria	4-10	Aqueous Dispersion	0.1-1.0%	Efficient inhibition of mold, yeast, and algae growth, green and stable, heat-resistant, and UV resistant.
Umiguard Z40 X	Fungi (Yeast & Molds), Algae & Bacteria	4-10	Aqueous Dispersion	0.1-1.0%	Efficient inhibition of mold, yeast, and algae growth, green and stable, heat-resistant, and UV resistant.
Umiguard Z50	Fungi (Yeast & Molds), Algae & Bacteria	4-10	Aqueous Dispersion	0.1-1.0%	Efficient inhibition of mold, yeast, and algae growth, green and stable.
Umiguard Z98	Fungi (Yeast & Molds), Algae & Bacteria	4-10	Powder	0.1-0.5%	Complies with the latest green coating standards and provides surface antibacterial efficacy.
Umiguard IPBC	Fungi (Yeast & Molds), Algae & Bacteria	4-9	Powder	0.2-1.0%	Efficient inhibition of mold, yeast, and algae growth, green and stable, providing long-lasting protection.

Transportation and storage:Stable under normal storage conditions down to 0 ° C. If frozen, allow to thaw and stir well before use. The active agents are heat stable and non-volatile.

Plastic drums: 25 kg , IBCs: 1,000 kg

PREVIOUS：Umiguard Z10 NEXT：Zinc Pyrithione Powder 98%